Catalog navigation
CAD model selection
Selectable products: 8
HELP_VARIABLE
Manufacturer
Wichmann Brandschutzsysteme GmbH & Co. KG
Part ID
Description short text
Mounting location
Application areas
Soundproofing of openings in walls and ceilings
Installation type
screw onto the wall/ceiling
LOD Level
Sound insulation values
Tested according to DIN EN 20140-10 and DIN EN ISO 140-3. Unassigned: Dn, e, w 61 dB* RW 37 dB*. With 50% occupancy: Dn, e, w 61 dB* RW 37 dB* (* the resulting sound insulation depends on the installation conditions).
Thumbnail
Steropor cover
Height of the acoustic box (external dimensions) (HA)
110 mm
Width of the acoustic box (external dimensions) (BA)
mm
Overall depth (T)
140 mm
Height of the usable opening (internal dimensions) (HI)
90 mm
Width of the usable opening (internal dimension) (BI)
mm
Shape of the shell opening
rectangular
GTIN
Sound insulation
increased noise protection tested
Deviations and special solutions
on request
Material
Galvanized sheet steel housing with internal foam layers
Description long text
Acoustic box E "System Wichmann" ®. E = Extended = A sound-decoupled acoustic box for very good damping of airborne noise. The acoustic box E does not protect against fire events, but ensures peace and quiet thanks to its wavy waffle foam material. It is particularly suitable for soundproof walls and flying cabling. The box consists of two parts, each screwed onto one side of the wall or ceiling. Two acoustic boxes must therefore be used per penetration. The component opening itself always remains open. The frame of the box lies flat after screwing and seals with a foam rubber to the wall or ceiling. Mortaring in the box and subsequent sealing of the passage with silicone or acrylic are no longer necessary with this solution. The cover of the housing can be opened at any time with latches. In this way, cables and lines can be quickly reassigned and/or the foam layers can be removed and cut to fit the cable routes that have been laid. The sound insulation values ​​can be found in the technical data sheet. The assembly is carried out according to the enclosed assembly instructions. No processor certification is required for installation.
Tender text
Akustikbox E „System Wichmann“ ®: Akustikbox E zur Schalldämmung von Kabeldurchführungen in Wänden und Decken. Akustikbox E bestehend aus verzinktem Stahlblechgehäuse, gefüllt mit Schallschutz-Schaumstofflagen. Es wird jeweils eine Box auf jeder Wandseite auf die Wand geschraubt. Die Kabel werden zwischen die Schaumstofflagen gelegt. Die Box wird mit Hilfe eines Spannverschlusses geschlossen. Eine zusätzliche Abdichtung mit dauerelastischem Dichtstoff entfällt. Die Akustikbox E ist jederzeit revisionierbar und kann flexibel an die Belegung angepasst werden. Die Akustikbox wird inkl. Montageanleitung und Güteschild geliefert. Geprüft nach DIN EN 20140-10 und DIN EN ISO 140-3. Die Tiefe der Box ist einheitlich 140 mm. Für den Einbau ist keine Verarbeiter-Zertifizierung notwendig. Schalldämmwerte: ohne Belegung Dn,e,w 54 Rw 30*; mit 50 % Belegung Dn,e,w 54 Rw 30* (*der resultierende Schallschutz ist abhängig von den Einbaubedingungen). Leitfabrikat Akustikbox E „System Wichmann“ ®, Artikelbeschreibung: Akustikbox Typ "E" 110x380x140mm (HxBxT) 2 Akustikboxen E pro Durchführung, Artikelnummer: ABE110380. Hersteller: Wichmann Brandschutzsysteme GmbH & Co. KG, Siemensstraße 7, 57439 Attendorn, Tel: +49 2722 6382-0, Fax: +49 2722 6382-299, E-Mail: info@wichmann.biz, www.wichmann.biz.
Class ETIM-8.0
EC004508, Acoustic partitioning box for cables
Model
Cable box
Shape
Rectangular
Construction type
Two-part
External height
110 mm
Outer width
mm
Depth
140 mm
Internal height
90 mm
Internal width
mm
Assembly instructions
Installation instructions and technical data sheet acoustic box E
Size Chart
Size table acoustic box E
Tender text Word
Tender text acoustic box E WORD
Tender text GAEB
Tender specification acoustic box E GAEB
Link
Link to the acoustic box E on the Wichmann homepage
Previews
3D
2D